If you own a Canon printer and are looking for this article, you're probably just "waste ink absorber is full" error, or something similar, and have no idea what is or what is expected of the printer that you do. Unfortunately or fortunately, you're not the only one with this problem and there are ways to solve it. If you call Canon support, they will immediately say to get the printer for maintenance, this does not help, but if you continue to have a relationship or the pressuretomorrow.
First, it is important to note that the waste ink absorber is a small block that is under the cartridge of "home" position and collect all the ink that can be dissolved on the tape. This will prevent stains, so it's a good thing to have. Inkjet printers have many, but as far as I know, only Canon PIXMA receive an error message when a certain internal counter suggests that the tank is full. If you made a lot of pressure, the ink absorber can actuallyfull and you have to have them cleaned or replaced to ensure the best print quality. However, if you print more, or you have and you only need to print something at the moment, there is a way to reset the counter and stop the error appears again. Until the counter has a certain unknown point, that is, in this case, you must repeat the process.
Unfortunately, the instructions for resetting the counter vary from printer to printer and again asAs far as I can tell, are not mentioned in the manual. People were able to figure out how to do it, though, and there are instructions online for many printers. Search by printer model and is "waste ink tank" or "used ink tank" you should be able to see a little 'link. Almost all are fairly easy to follow, if not too artificial and easily find out by yourself. Once the counter is reset, you should be able to print.
When the absorber in the ink padCanon is full, in fact, can be replaced. Once that is maintained generally not a good choice because it probably costs almost as much as the initial cost of the printer and is not covered by warranty as it is considered normal wear and tear and not a defect. Canon, however, sell a new ink tank can not be too difficult to replace. The number to call, in the U.S. is 732-521-7230, that's their problem New Jersey parts center. They are open from Monday to Friday9.00 bis 20.00 EAST clock and should be able to sell a replacement. You can also try your Canon ink tank without replacing it with tissue, so out of the shock absorber absorbs the ink, as you can clean.
0 comments:
Post a Comment